Park Assist System - Operation: Notes
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Vehicles equipped with InControl™ Touch Systems are equipped with an Audio Head Unit (AHU). Vehicles equipped with InControl™ Touch Pro Systems are equipped with Infotainment Master Controller (IMC).
When park assist system is switched on. The park assist switch is used to scroll through the three park assist options:
- Parallel parking.
- Perpendicular parking.
- Parking exit.
When selected, instructions for the three park assist options are displayed in the message center.
Instructions are then communicated to the driver using the following methods:
- Visual - graphical and text message instructions in the message center.
- Audible - variable sound tones through vehicle speakers.
The park assist system only becomes active when the vehicle speed is less than 30 km/h (18 mph).
The park assist system must not be used if:
- A temporary spare wheel is in use.
- A sensor is damaged or the bumper is damaged sufficiently to affect a sensor mounting point.
- A sensor is obstructed by items attached to the vehicle, e.g, bumper covers, a bicycle rack, a trailer, stickers, etc.
- The vehicle is being used to transport a load that extends beyond the vehicle perimeter, for example a trailer.
During any park assist manoeuver, the parking aid system will remain active and will sound when objects are detected near the vehicle. A parking manoeuver can be cancelled at any point by holding/turning the steering wheel or by pressing the park assist switch.