LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission RWD >> Input Shaft Seal >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Be prepared to collect escaping fluids.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle. Refer to: Lifting .

  2. Refer to: Transmission - INGENIUM I4 2.0L Diesel .

    Refer to: Transmission - V6 S/C 3.0L Petrol .

  3. CAUTION: Be prepared to collect escaping fluids.
    G11291629

    Special Tool(s):  307-613

  4. CAUTION:
    • Take extra care not to damage the edges of the component.
    • Discard the seal.
    G11298530

    Special Tool(s):  100-012, 100-012-01, 308-375

scientia non olet · About LEMON Manuals