Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (General Procedures).
- Refer to: Air Deflector (Removal and Installation).
If equipped.
If equipped.
Torque Specification: 9 Nm
Torque Specification: 9 Nm
-
CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.
Torque Specification: 9 Nm
Torque Specification: 25 Nm