Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (General Procedures).
- Refer to: Charge Air Cooler .
Torque Specification: 10 Nm
Torque Specification: 47 Nm
-
NOTE: Note the fitted position of the accessory drive belt.
-
Torque Specification: 47 Nm
-
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. ?When ?disconnected all openings must be sealed.NOTE: Install new O-ring seals.
Torque Specification: 9 Nm
Torque Specification: 25 Nm