Pinpoint Test K: Massage Seat Tests
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
- K1: MASSAGE SEAT TEST 1
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - On Demand Self Test
- Check the relevant seat module for related DTCs
Are any relevant DTCs set?
- Yes : Perform the relevant corrective action
- No : GO to K2.
- K2: MASSAGE SEAT TEST 2 NOTE: The massage circuit current specification is 1.10A ± 10%.
- Connect an inductive ammeter to the massage master solenoid power circuit
- Set the seat massage function to on
Is the measured current less than specification?
- Yes : Refer to the applicable System Wiring Diagram(s) and check the seat massage circuits for open circuit, high resistance
- No : Check the massage air cell hoses for blockages/leaks