LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Seating -- XE (X760)) >> Seating >> Lumbar Assembly >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • To avoid accidental deployment, the restraints control module backup power supply must be depleted. Wait at least one minute after disconnecting the battery ground cable(s) before commencing any repair or adjustment to the supplemental restraint system (SRS), or any component(s) adjacent to the SRS sensors. Failure to follow these instructions may result in personal injury.
  • Always wear safety glasses when working on an air bag equipped vehicle and when handling an air bag module. Failure to follow this instruction may result in personal injury
  • To minimize the possibility of premature deployment, do not use radio key code savers when working on the supplemental restraint system. Failure to follow this instruction may result in personal injury.
  • To minimize the possibility of injury in the event of premature deployment, always carry a live air bag module with the bag and trim cover pointed away from the body. Failure to follow this instruction may result in personal injury.
  • To minimize the possibility of premature deployment, live air bag modules must only be placed on work benches which have been ground bonded and with the trim cover facing up. Failure to follow these instructions may result in personal injury.
  • Never probe the electrical connectors of air bag modules or any other supplemental restraint system component. Failure to follow this instruction may result in personal injury.
  • Painting over the driver air bag module trim cover or instrument panel could lead to deterioration of the trim cover and air bags. Do not for any reason attempt to paint discolored or damaged air bag module trim covers or instrument panel. Install a new component. Failure to follow this instruction may result in personal injury.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Removal steps in this procedure may contain installation details.

All vehicles 

  1. Refer to: FRONT ROW SEAT 
  2. G11312501
  3. G11312505
  4. G11312506
  5. G11312507
  6. CAUTION: A suitable tool must be used during this step to avoid damage to the head restraint retaining clips.
    G11312508
  7. G11312509
  8. G11312510
  9. G11312511
  10. G11312512
  11. G11312513
  12. G11312514
  13. G11312515
  14. G11312516
  15. G11312517

    Vehicles with heated front seats 

  16. G11312518
  17. G11311943
  18. G11311791
  19. G11312519
  20. WARNING:
    • Do not probe supplemental restraint system (SRS) electrical connectors.
    • The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
    NOTE: LH illustration shown, RH is similar.
    G11312520
  21. G11312521

    Torque Specification: 7 Nm 

  22. G11312522
  23. G11311949
  24. G11311950
  25. G11311793
  26. G11311790
  27. CAUTION: Care must be taken not to damage the component.
    G11311953
  28. CAUTION: Care must be taken not to damage the component.
    G11311954
  29. CAUTION:
    • Care must be taken not to damage the component.
    • Take extra care not to damage the surrounding components.
    G11311955
  30. NOTE: Remove and discard the securing tie strap.
    G11311956
  31. G11311957

    Release the hook from the seat frame, as illustrated.

  32. G11311958
scientia non olet · About LEMON Manuals