LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Seating -- XE (X760)) >> Seating >> Front Seat Tilt Assembly >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Removal steps in this procedure may contain installation details.
  1. Raise the front seat to the highest position.
  2. Refer to: FRONT ROW SEAT .
  3. G11312501
  4. G11312505
  5. G11312506
  6. G11312507
  7. G11312509
  8. G11312510
  9. G11312511
  10. G11312512
  11. G11312513
  12. WARNING:
    • Do not probe supplemental restraint system (SRS) electrical connectors.
    • The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
    NOTE: LH illustration shown, RH is similar.
    G11312520
  13. G11311790
  14. G11311791
  15. G11311792
  16. G11311793
  17. G11312518
  18. G11311795
  19. G11312493
  20. G11311797
  21. G11311798
  22. G11311799
  23. G11311800
  24. G11311801
  25. G11312491
  26. G11312492
  27. G11311804
  28. G11312494
  29. G11311806
  30. G11311807

    Torque Specification: 5 Nm 

  31. G11311808
  32. G11311809
  33. G11312416

    Torque Specification: 40 Nm 

  34. G11311811

    Torque Specification: 6 Nm 

  35. G11311812
  36. NOTE: Repeat the procedure for the other side.
    G11311892

    Torque Specification: 8 Nm 

  37. G11311893
  38. G11312059

    Torque Specification: 26 Nm 

  39. G11312060

    Torque Specification: 10 Nm 

  40. NOTE: Note the orientation of the component prior to removal.
    G11312061
  41. G11312062

    Torque Specification: 30 Nm 

scientia non olet · About LEMON Manuals