LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Seating -- XE (X760)) >> Seating >> Front Row Passenger Seat Cushion >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: The front passenger seat occupant classification sensor is available only as a service kit. No attempt should be made to replace individual components. Failure to follow this instruction may result in personal injury.
    G11312500
  2. To install, reverse the removal procedure.
  3. NOTE: Make sure that the front seats are empty during this process.
    1. If a new service kit is installed, configure the occupant classification sensor using the approved Jaguar diagnostic tool and clear any DTCs.
    2. If a repair has been carried out, reset the occupant classification sensor using the approved Jaguar diagnostic tool and clear any DTCs.
scientia non olet · About LEMON Manuals