Seat Memory

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The seat memory switchpack is connected to the driver seat switchpack. A Local Interconnect Netwrok (LIN) bus connects the seat switchpack to the DSM. The selected memory position switch operation is passed from the seat switchpack on LIN bus to the DSM which operates the seat motors to the correct positions associated with that memory preset position.

The memory function store the door mirror positions associated with the selected memory preset switch 1 to 3.

To store a memory position, move the seat and the door mirrors to the required positions, and press the 'M' switch on the memory switchpack. Then press the a memory preset switch 1 to 3 to store the position against the selected memory switch preset number.

A single chime audible confirmation is generated by the Instrument Cluster (IC) to provide confirmation to the driver that the memory store operation has been successfully completed.

The Information and Message Center will display a message to confirm that the action is complete.

For additional information, refer to: Information and Message Center (Description and Operation).