Rear Seats
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
Control of the rear seat heating is by switches on the rear of the center console. There are three LEDs to indicate the temperature.
The control signal is on the LIN Bus. The heater elements receive a supply from the PJB.
To fold the rear seats, operate the relevant seat release mechanism located in the trunk.
The middle of the rear seat can also be released separately. Press and hold the button to release and then fold the middle of the rear seat forward.
Ensure there are no obstructions when folding the seats.