Front Climate Seats

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Depending on vehicle specification, climate controlled front seat is available for the power operated seats. A heating/cooling element is incorporated within each front seat cushion and squab. The Seat Climate Control Module (SCCM) (Driver and Passenger side) and electrical wiring is located beneath each front seat.

The heating/cooling of the climate seats only operates when the engine is running. The modules are connected on the LIN bus to the ATCM, power feed for the climate assemblies in the seats is supplied from the PJB.

The SCCM uses the signals from the temperature sensors in the backrest and the cushion climate assemblies to regulate the seat at the selected temperature. If full seat heating/cooling is selected, both the backrest and the cushion climate assemblies are activated. If partial seat heating/cooling is selected, only the backrest climate assembly is activated.