Headlamp Delay Timer
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The BCM/GWM assembly controls a headlamp delay function which illuminates the driveway after leaving the vehicle. The BCM/GWM assembly activates the low beam headlamps for the required delay period. The delay timer is set within the IC 'Vehicle Set-up Menu'. The default timing is 30 s, but the timing can be changed to between 0 s (OFF), 30 s (default), 60 s, 120 s and 240 s.
For additional information, refer to: Information and Message Center (413-08 Information and Message Center, Description and Operation).