Body Control Module/Gateway Module (BCM/GWM) Assembly
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The BCM/GWM controls the exterior lighting system through interconnections as follow:
- Left steering column multifunction switch
- Side lamp position
- Low beam position
- Automatic ('AUTO') position (if equipped)
- Rear fog lamp switch
- Turn signal indicators
- High beam switch
- Headlamp flash
- Brake pedal switch
- Manual headlamp leveling control switch (halogen only)
- Automatic headlamp leveling (Xenon and AFS LED)
- Hazard warning lamp switch
- Rain/light sensor.