High Beam On And Flash Functions
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The high beam is operated by pushing the left steering column multifunction switch towards the IP. The switch will latch in the high beam position. When the high beam headlamps are active, the high beam warning indicator will illuminate in the IC.
The high beam flash function is operated by pulling the left steering column multifunction switch away from the IP. The non-latching switch will operate the high beam headlamps for as long as the switch is held. The switch will return to the high beam off position when released. The high beam warning indicator will illuminate when the high beam headlamps are active.
High beam can also be automatically operated by the IPCM system (if equipped).