Engine Drag-Torque Control (EDC)
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
Engine Drag-torque Control (EDC) stops wheel slip caused by any of the following:
- A sudden decrease in engine torque when the accelerator is suddenly released.
- A downshift using the Jaguar sequential shift function.
When the ABS control module detects the onset of wheel slip without the brakes being applied, the ABS control module signals the PCM through the HS CAN Bus to request a momentary increase in engine torque.