LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Instrument Cluster -- XE (X760)) >> Instrument Cluster >> Instrument Cluster (G1818747) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Configure the instrument cluster and ignition keys using the diagnostic tool.
    CAUTION: If a new instrument cluster is to be installed, the diagnostic tool must be connected prior to removal, the data must then be downloaded from it and the keys (remote control handsets) set into default mode. Failure to follow this instruction will result in permanent damage to the keys.
    NOTE: If a new instrument cluster is to be installed, make sure that all keys (remote control handsets) are present.
  2. Refer to: Battery Disconnect and Connect .
  3. Fully extend and lower the steering column for access.
  4. G11308843
  5. G11310682
  6. G11310683
  7. G11310684
  8. CAUTION: Take extra care not to damage the instrument cluster face.
G11310685
scientia non olet · About LEMON Manuals