Visual Inspection
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern
- Visually inspect for obvious signs of damage and system integrity
- With the ignition on, check the operation of the audio output from the instrument cluster integrated speakers by operating the turn signal indicators (left and right) and verifying that audible feedback (a ticking sound) is present
MECHANICAL ELECTRICAL - Switches
- Instrument cluster lens
- Fuses
- Wiring harnesses and connectors
- Instrument cluster
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
- If the cause is not visually evident, verify the symptom and refer to the Symptom Chart, alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index
- Check DDW for open campaigns. Refer to the corresponding bulletins and SSMs which may be valid for the specific customer complaint and carry out the recommendations as required