Head Up Display (HUD)
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The HUD is controlled from the message center menu.
When selected, the menu offers the following options:
- Selecting the position of the display on the windshield.
- Display brightness.
- Selecting which information is displayed on the HUD.
Control of the display brightness can be adjusted in three different ways:
- As listed above, manually, from within the HUD selection of the Main Menu in the message center.
- If the vehicle lighting is switched on, the HUD display will adjust simultaneously with the manual adjustment of the IC panel light dimmer switch.
- Automatic brightness, controlled using data from the forward ambient light sensor, housed in the Rain/light sensor.
For additional information, refer to: Information and Message Center .
For additional information, refer to: Exterior Lighting .
Prior to selecting the HUD windshield position the user should select their desired seating position. The steering wheel controls are used to set the horizontal position of the windshield display. Once set, the information can be saved in the seat memory control system, storing the selected preferences.
For additional information, refer to: Seats .