LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine - V6 S/C 3.0L Petrol -- XE (X760)) >> Engine - V6 S/C 3.0L Petrol >> Fuel Pump Camshaft >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Some illustrations may show the engine removed for clarity.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect (General Procedures).

  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: OIL PAN EXTENSION  (Removal and Installation).
  4. G11286982
  5. G11287044

    Make sure the crankshaft is at the timed position.

  6. CAUTION: Using a suitable tool, lock the component.
    G11287051
  7. CAUTION: Take extra care not to damage the surrounding components.
    G11299712
  8. G11299713
  9. CAUTION: Take extra care when removing the component, prevent damage to the mating faces.
    G11299714
scientia non olet · About LEMON Manuals