LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Rear Drive HALFSHAFTS -- XE (X760)) >> Rear Drive HALFSHAFTS >> Inner Constant Velocity Joint Boot (G2085466) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11284247

    Install the CV joint boot and retaining clip.

  2. NOTE: Make sure that the component is installed to the position noted on removal.
    G11284243

    Install a new retaining clip.

  3. G11284271

    Install the Inner (CV) joint.

  4. G11284251
    1. Pack the inner CV joint with the grease supplied.
    1. Install the 2 retaining clips.
  5. Install the rear halfshaft.

    Refer to: Rear Halfshaft - INGENIUM I4 2.0L Diesel .

scientia non olet · About LEMON Manuals