Visual Inspection

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

Verify the customer concern by carrying out a road test of the vehicle

Visually inspect for obvious signs of mechanical damage and system integrity

MECHANICAL
Wheel rim and tire damage or runout Check all the driveshaft and halfshafts for damage including dents, cracks and excessive runout Check all the constant velocity joint gaiters for splits, damage and security Check all the driveshaft and halfshafts for correct alignment Check the driveshaft mounting bolts security Check all the driveshaft and halfshaft joints for excessive movement Check the differential mounting bolts and bushes for wear, damage and security Check the differential for oil leaks

MECHANICAL

Wheel rim and tire damage or runout
Check all the driveshaft and halfshafts for damage including dents, cracks and excessive runout
Check all the constant velocity joint gaiters for splits, damage and security
Check all the driveshaft and halfshafts for correct alignment
Check the driveshaft mounting bolts security
Check all the driveshaft and halfshaft joints for excessive movement
Check the differential mounting bolts and bushes for wear, damage and security
Check the differential for oil leaks

If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
If the concern is not visually evident, verify the symptom and refer to the symptom chart