Removal And Installation: Notes
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| 60.35.05 |
SUSPENSION UNIT - RENEW |
2000 CC, INGENIUM DIESEL, 2WD |
2.8 |
| 60.35.05 |
SUSPENSION UNIT - RENEW |
2000 CC, INGENIUM DIESEL, 4WD |
4 |
| 60.35.05 |
SUSPENSION UNIT - RENEW |
2000 CC, INGENIUM PETROL, 2WD |
2.8 |
| 60.35.05 |
SUSPENSION UNIT - RENEW |
2000 CC, INGENIUM PETROL, 4WD |
4 |
| 60.35.05 |
SUSPENSION UNIT - RENEW |
3000 CC, AJ V6 (AJ126), 4WD |
4.1 |
SPECIAL TOOL(S)
|
|
303-021
Engine support bracket |
|
|
JLR-303-1591
Lifting Bracket, Engine - Rear |
GENERAL EQUIPMENT
| EQUIPMENT NAME |
| Four-post lift |
| Powertrain Jack |
| Two-post lift |
| Vehicle/axle stands |
PART(S)
| STEP |
PART NAME |
QUANTITY |
| Installation Step 6 |
Steering gear bolts |
1 |
| Installation Step 10 |
Front subframe to body bolts |
1 |
| Installation Step 12 |
Steering column lower shaft lower bolt |
1 |
| Installation Step 16 |
Engine mount to engine mount bracket nut |
1 |
| Installation Step 21 |
Front lower control arm nut and bolt |
1 |
| Installation Step 21 |
Rear lower control arm nut and bolt |
1 |
| Installation Step 22 |
Tie-rod end nut |
1 |
| Installation Step 23 |
Stabilizer bar link retaining nuts |
1 |