Removal And Installation: Part(S)
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Installation Step 6 | Steering gear bolts | 1 |
| Installation Step 10 | Front subframe to body bolts | 1 |
| Installation Step 12 | Steering column lower shaft lower bolt | 1 |
| Installation Step 16 | Engine mount to engine mount bracket nut | 1 |
| Installation Step 21 | Front lower control arm nut and bolt | 1 |
| Installation Step 21 | Rear lower control arm nut and bolt | 1 |
| Installation Step 22 | Tie-rod end nut | 1 |
| Installation Step 23 | Stabilizer bar link retaining nuts | 1 |