LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Uni-Body, SUBFRAME & Mounting System) >> Uni-Body, SUBFRAME And Mounting System >> Front SUBFRAME - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that new setting clips are installed.
    G11312970
  2. G11312971

    To install, reverse the removal procedure.

  3. Check, and if necessary, adjust the wheel alignment.

    Refer to: Four-Wheel Alignment

scientia non olet · About LEMON Manuals