Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: Lifting .
- Remove the air deflector.
Refer to: Air Deflector .
Vehicles with 3.0L diesel engine
- Remove the exhaust system.
Refer to: Exhaust System .
All vehicles
- Remove the 4 bolts.CAUTION:
- Risk of damage to the seals may occur if sharp objects are inserted.
- Discard the bolts.
- Remove the front driveshaft.
All vehicles