LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Driveshaft -- XE (X760)) >> Driveshaft >> Front Driveshaft - AWD >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

    All vehicles 

  1. NOTE: Apply the required quantity of grease meeting the correct specification.

    Install the front driveshaft.

    Refer to: Specifications .

  2. Install the 4 bolts.
    CAUTION: Make sure that new bolts are installed.
    NOTE: Make sure that you re-align the driveshaft to the transmission flange using the alignment mark.

    Renew Part: Driveshaft to front output flange bolts. 

    Torque Specification: 

    Stage 1: 40 Nm 

    Stage 2: 90° 

    Vehicles with 3.0L diesel engine 

  3. Install the exhaust system.

    Refer to: Exhaust System .

    Refer to: Exhaust System .

    All vehicles 

  4. Install the air deflector.

    Refer to: Air Deflector .

scientia non olet · About LEMON Manuals