Removal And Installation: Notes
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| 47.15.03 |
REAR DRIVE (PROPELLER) SHAFT - RENEW |
2000 CC, INGENIUM DIESEL, WITH PARTICULATE FILTER, WITH DIESEL EXHAUST FLUID |
2 |
| 47.15.03 |
REAR DRIVE (PROPELLER) SHAFT - RENEW |
2000 CC, INGENIUM DIESEL, WITH PARTICULATE FILTER, WITHOUT DIESEL EXHAUST FLUID |
1.5 |
| 47.15.03 |
REAR DRIVE (PROPELLER) SHAFT - RENEW |
2000 CC, INGENIUM DIESEL, WITHOUT PARTICULATE FILTER |
1.7 |
| 47.15.03 |
REAR DRIVE (PROPELLER) SHAFT - RENEW |
2000 CC, INGENIUM PETROL |
1.7 |
| 47.15.03 |
REAR DRIVE (PROPELLER) SHAFT - RENEW |
3000 CC, AJ V6 (AJ126) |
1.9 |
| STEP |
PART NAME |
QUANTITY |
| Step 7 |
Driveshaft to front output flange bolts |
6 |
| Step 9 |
Rear driveshaft constant velocity joint bolts |
6 |