LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Front Drive Axle/Differential -- XE (X760)) >> Front Drive Axle/Differential >> Differential Case - INGENIUM I4 2.0L Diesel AWD (G1913603) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    WARNING: Make sure to support the vehicle with axle stands.
  2. Refer to: Differential Draining and Filling .
  3. Refer to: Front Subframe - INGENIUM I4 2.0L Diesel .
  4. Refer to: Front Driveshaft - AWD .
  5. G11305851
  6. CAUTION: Do not carry out this step if a new differential is to be installed.
G11305838

Remove and discard the O-ring seal.

scientia non olet · About LEMON Manuals