LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Front Drive Axle/Differential -- XE (X760)) >> Front Drive Axle/Differential >> Differential Case - INGENIUM I4 2.0L Diesel AWD (G1913603) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all the mating faces and reusable parts thoroughly and check for damage.
  2. Install a new O-ring seal.
    NOTE: This step is only required if previously removed.
    G11305853

    Renew Part: Halfshaft seal Quantity: 1.

  3. G11305851

    Torque Specification: 115 Nm 

  4. Refer to: Front Subframe - INGENIUM I4 2.0L Diesel .
  5. Refer to: Front Driveshaft - AWD .
  6. Refer to: Differential Draining and Filling .
scientia non olet · About LEMON Manuals