LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Suspension System - General Information -- XE (X760)) >> Suspension System - General Information >> Specifications >> --Wheel Alignment Specification - Rear - All markets except India and LWB

--Wheel Alignment Specification - Rear - All markets except India and LWB

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Both toe links must be adjusted by an equal amount.
NOTE: All figures are with vehicle at 'Showroom' ride height - full fluids, full tank of fuel, no occupants/luggage, tires inflated to normal pressures
ITEM   LEFT-HAND RIGHT-HAND TOTAL/BALANCE THRUST ANGLE
Camber    Nominal  Tolerance  Nominal  Tolerance  Nominal  Tolerance     
  Decimal degrees -0.81° ± 0.65° -0.81° ± 0.65° 0.0° ± 0.75°    
  Degrees/minutes -48' ± 39' -48' ± 39' 0' ± 45'    
Toe   Nominal  Tolerance  Nominal  Tolerance  Nominal  Tolerance  Nominal  Tolerance 
  Decimal degrees - - - - 0.12° ± 0.06° 0° ± 0.05°
  Degrees/minutes - - - - 7' ± 4' 0' ± 3'