Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Removal steps in this procedure may contain installation details.
Automatic transmission shown, manual transmission is similar.

Left-hand drive vehicles

Refer to: Secondary Bulkhead Left Panel - INGENIUM I4 2.0L Diesel , Secondary Bulkhead Right Panel - V6 S/C 3.0L Petrol , Secondary Bulkhead Left Panel - V6 S/C 3.0L Petrol .
All vehicles
Refer to: Brake Master Cylinder .
Torque Specification: 25 Nm
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed