LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Front Disc Brake -- XE (X760)) >> Front Disc Brake - INGENIUM I4 2.0L Diesel >> Brake Pads - INGENIUM I4 2.0L Diesel (G1822046) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the brake caliper housing and anchor plate using brake cleaning fluid.
    WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
    CAUTION: Make sure that the mating faces are clean and free of foreign material and that no grease is applied to the brake pad guides.
    G11308637
  2. Inspect the caliper piston and slide pin seals for damage.
    G11308612
  3. G11308639
  4. G11308652
  5. CAUTION: Make sure that the brake hose is not twisted and is correctly located.
    G11308635

    Torque Specification: 33 Nm 

  6. G11308609
  7. G11308645
  8. Repeat the above procedure for the other side.
  9. Install the wheels and tires.

    Refer to: Wheel and Tire .

  10. Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top-up with brake fluid if necessary.
scientia non olet · About LEMON Manuals