LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Front Disc Brake -- XE (X760)) >> Front Disc Brake - INGENIUM I4 2.0L Diesel >> Brake Disc - V6 S/C 3.0L Petrol/INGENIUM I4 2.0L Diesel (G1822043) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: If installing a new brake disc, install new brake pads.
CAUTION: Brake discs must be renewed in pairs.
NOTE:
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    WARNING: Make sure to support the vehicle with axle stands.
  2. Remove the wheel and tire.

    Refer to: Wheel and Tire .

  3. Tie aside.
    CAUTION:
    • Do not allow the brake caliper to hang on the brake hose.
    • Discard the bolts.
    G11308627

    Renew Part: Brake caliper carrier bolt(s) Quantity: 1.

    Torque Specification: 

    Stage 1: 70 Nm 

    Stage 2: 120° 

  4. G11308628