HOMELINK® Universal Transmitter
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before programming HomeLink® to a garage door opener or gate operator, make sure that people and objects are out of the way of the device to prevent potential harm or damage.
NOTE:
- Garage door openers manufactured after 1996 may be equipped with rolling code protection feature. If this is the case, you may need a stepladder or other sturdy, safe device to reach the 'Learn' or 'Smart' button on the garage door opener.
- When programming a garage door opener, it is advised to park outside of the garage.
- Additional HomeLink® information can be found at www.HomeLink.com. If additional programming support is needed, please call the toll-free HomeLink Hotline at 1-800-355-3515.
- Please note that the instructions below apply to the majority of HomeLink® use cases. However, there are some HomeLink® applications or HomeLink® compatible systems that require slightly different instructions. For more information and for custom training instructions specific to your device, visit http://www.HomeLink.com.
- HomeLink® is a registered trademark owned by GENTEX CORPORATION.
The HomeLink® wireless control system provides a convenient way to replace up to three hand-held Radio Frequency (RF) transmitters used to activate devices such as gate operators, garage door openers, entry door locks, security systems, even home lighting.