LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel >> Mass Air Flow Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mass air flow sensor.
    CAUTION: Make sure that the mating faces are clean and free from foreign material.
    NOTE: Install a new O-ring seal.

    Renew Part: Mass air flow sensor O-ring seal. 

  2. Install the air cleaner.

    Refer to: Air Cleaner .

scientia non olet · About LEMON Manuals