LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel >> Diagnosis And Testing >> Drive Cycle: Particulate Matter (Pm) Sensor Monitors >> Notes

Drive Cycle: Particulate Matter (Pm) Sensor Monitors: Notes

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • This procedure must not be attempted without assistance. Failure to comply with this instruction may result in personal injury or death.
  • Diagnostic equipment must not be operated while driving. Failure to comply with this instruction may result in personal injury or death.
  • Take additional care when driving on public roads. Always observe local speed restrictions and traffic regulations when performing this procedure. Failure to comply with this instruction may result in personal injury or death.

Read and understand all steps before commencing the drive cycle.

Some of the particulate matter sensor monitors require the successful completion of two active regenerations of the diesel particulate filter before they will commence. This would require an unfeasible long drive cycle. If the readiness status of the particulate matter sensor monitors remains 'Incomplete' after performing this drive cycle, it is recommended that these monitors are allowed to achieve readiness automatically during normal driving by the customer.

scientia non olet · About LEMON Manuals