LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel >> Diagnosis And Testing >> Drive Cycle: Generic >> Interpretation Of Results

Interpretation Of Results

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

If the readiness status of any group of monitors (excluding the particulate matter sensor monitors and the non-methane hydrocarbons monitors) is displayed as 'Incomplete', perform the generic drive cycle again after ensuring that the entry conditions are satisfied.

If the readiness status of the particulate matter sensor monitors is displayed as 'Incomplete', it is recommended that these monitors are allowed to achieve readiness automatically during normal driving by the customer.

If the readiness status of the non-methane hydrocarbons monitors is displayed as 'Incomplete', it is recommended that these monitors are allowed to achieve readiness automatically during normal driving by the customer.

If the readiness status of every group of monitors is displayed as 'Complete', no further action is necessary.

scientia non olet · About LEMON Manuals