LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XE (X760)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel >> Cylinder Head Temperature Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be prepared to collect escaping coolant.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    CAUTION: Make sure to support the vehicle with axle stands.

  2. Refer to: Cooling System Partial Draining and Vacuum Filling .

  3. Refer to: Coolant Expansion Tank .
  4. Refer to: Engine Mount RH .
  5. G11308420
  6. G11308421
  7. CAUTION: Discard the cylinder head temperature sensor.
    G11308422

    Renew Part: Cylinder head temperature sensor Quantity: 1

    Torque Specification: 10 Nm 

scientia non olet · About LEMON Manuals