Center Section - Vehicles Without SCR
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The center section connects to the front section by a flange. It is sealed with a metal gasket and secured with two studs and nuts. The flange is connected to a flexible coupling.
A long pipe from the flexible coupling connects the center section to the rear section with a clamp.
A hanger bar with a rubber mounting is connected to a common bracket which is bolted to the vehicle body, to the support the center section.