DTC P0111-22: Intake Air Temperature Sensor 1 Circuit Range/Performance Bank 1 - Signal amplitude > maximum: Action
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Using the Jaguar Land Rover approved diagnostic equipment, check datalogger signals - Charge Air Temperature Voltage (0x03EE) - Intake Air Temperature Sensor Voltage (0x1279)
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the appropriate System Wiring Diagram(s) and check connections are secure and wiring integrity
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest