LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Front End Body Panels) >> Front End Body Panels >> Secondary Bulkhead Left Panel - V6 S/C 3.0L Petrol >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

  2. Remove the RH secondary bulkhead panel.

    Refer to: Secondary Bulkhead Right Panel - V6 S/C 3.0L Petrol .

  3. G11311484

    Torque Specification: 55 Nm 

  4. G11311485

    Torque Specification: 8 Nm 

  5. G11311486

    Torque Specification: 10 Nm 

  6. G11311487

    Torque Specification: 10 Nm 

scientia non olet · About LEMON Manuals