Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure contains illustrations showing certain components removed to provide extra clarity.
- Disconnect the startup battery ground cable.
Refer to: Battery Disconnect and Connect .
- Remove the secondary bulkhead right panel.
Refer to: Secondary Bulkhead Right Panel - INGENIUM I4 2.0L Petrol .
- Remove 4 bolts.
- Remove the engine compartment brace.
- Disconnect the brake booster vacuum hose quick release connector.
- Remove the 3 bolts.
- Remove the secondary bulkhead left panel.