LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Front End Body Panels) >> Front End Body Panels >> Secondary Bulkhead Left Panel - INGENIUM I4 2.0L Diesel >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

  2. Remove the RH secondary bulkhead panel.

    Refer to: Secondary Bulkhead Right Panel - Ingenium I4 2.0L Diesel .

  3. G11311480

    Torque Specification: 55 Nm 

  4. G11311481

    Torque Specification: 8 Nm 

  5. G11311482
  6. Remove the fuel filter.

    Refer to: Fuel Filter .

  7. G11311483

    Torque Specification: 10 Nm 

scientia non olet · About LEMON Manuals