LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Front End Body Panels) >> Front End Body Panels >> Front CROSSMEMBER Support Bracket >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Headlamp Assembly .
  2. Refer to: Front Crossmember .
  3. NOTE: Right hand shown, left hand similar.
    G11311513
  4. NOTE: Right hand shown, left hand similar.
    G11311514
  5. G11311515

    Torque Specification: 10 Nm 

  6. NOTE: left side only.
    G11311516

    Torque Specification: 10 Nm 

  7. G11311517

    Torque Specification: 25 Nm 

scientia non olet · About LEMON Manuals