Visual Inspection
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern by operating the seatbelt
- Visually inspect for obvious signs of mechanical or electrical damage
MECHANICAL ELECTRICAL - Check for the installation of non-standard accessories which may affect or obstruct the function of the seatbelt system
- Frayed or damaged webbing
- Missing or damaged button stop
- Pretensioner(s)
- Buckles/Stalks
- Fuses
- Wiring harness fault
- Correct engagement of electrical connectors
- Loose or corroded connections
- Warning lamp bulb (s)
- Impact sensor(s)
- Buckle sensor(s)
- Pretensioner(s)
- Belt tension sensor (s)
- Restraints control module
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
- If the cause is not visually evident, carry out the test methods described below, alternatively check for diagnostic trouble codes and refer to the relevant diagnostic trouble code index