Pinpoint Test H: SEATBELT Buckle - Not Latching/Jammed
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- H1: SEATBELT BUCKLE - NOT LATCHING/JAMMED
Do not insert any objects or tools into the buckle head
- Visually inspect the buckle head for evidence of damage. If damaged replace as required
- Depress the buckle release (red button) and (Using a torch) carry out visual inspection for any evidence of debris/material or foreign objects in the buckle head
- If required remove the buckle from the vehicle
- Do not insert any objects or tools in the buckle head With the buckle removed invert and attempt to shake out any debris
- Attempt to latch the tongue in the buckle
Does the seat belt buckle operate correctly
- Yes : Reinstall any components, no further action required
- No : Replace the buckle, refer to: Diagnostic Trouble Code (DTC) Index - DTC: Restraints Control Module (RCM) / Rear Safety Belt Buckle .