Pinpoint Test E: Interference-Webbing Routing
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- E1: INTERFERENCE-WEBBING ROUTING
- Refer to the appropriate service information for removal and installation, remove any trim panels required to expose the D loop (anchor point)
- Remove obstructions and foreign objects ensure the webbing does not catch or rub
- Confirm the seatbelt does not contact the wiring harness
- Check for correct operation twice
Does the webbing move freely then retract correctly?
- Yes : Refer to the appropriate service information for removal and installation, reinstall any trim panels, ensure there are no obstructions and the webbing does not catch or rub. No further action required
- No : GO to Pinpoint Test F .