Description And Operation: Overview

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

A three point seatbelt is installed for each seat. A pretensioner is incorporated into the retractor of each seatbelt.

The pretensioners is pyrotechnic device which is controlled by the RCM (Restraints Control Module) in the SRS (Supplementary Restraint System). The tension sensor is part of the occupant classification system in the SRS.

For additional information, refer to: Air Bag Supplemental Restraint System (SRS) .

The center rear safety belt features a mini-buckle lower anchorage. The mini-buckle is disengaged by inserting a suitable tool into the small aperture on the front face of the housing.

To aid the fitment of child seats, 3 tethers are located on the rear parcel shelf.

A seatbelt reminder and a beltminder system warn the driver if the seatbelt of an occupied front seat is not fastened, or if a seatbelt is unfastened during the journey.