Warning Indicators
| ITEM | DESCRIPTION |
|---|---|
| 1 | Park brake warning indicator (Rest of World (ROW)) |
| 2 | Park brake warning indicator (North America Specification (NAS)) |
| 3 | Brake warning indicator (NAS) |
| 4 | Brake warning indicator (ROW) |
The Anti-lock Brake System (ABS) control module operates the Electric Park Brake (EPB) warning indicators. For warning indication the ABS control module uses the High Speed (HS) Controller Area Network (CAN) powertrain systems bus and messages to the Instrument Cluster (IC). When the EPB is applied in the STATIC mode of the vehicle the warning indicator stays red while the ignition is ON. The indicator stays On for 30 seconds after the ignition is OFF. All faults are shown by the warning indicators below the speedometer. The EPB warning indicator flashes red if the EPB is in an unknown position, for example, if it was not possible to complete an actuation. All warning indications are accompanied by a related message displayed in the message center and a warning chime.