LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2006213) >> Removal And Installation >> Thermostat Housing (G1998228) >> Installation

Thermostat Housing (G1998228): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the thermostat housing.

    Torque  : 12Nm 

  2. Connect the 2 electrical connectors.
    • Connect the coolant bypass hose to the thermostat housing.

    Torque  : 7Nm 

  4. Connect the coolant outlet hose to the thermostat housing.
  5. Connect the 2 coolant hoses.
  6. Install the NVH pad.
  7. Fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING

  8. Install the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL

scientia non olet · About LEMON Manuals